VpCI-375 Acrylic water-based primer for metals


VpCI-375 is a water-based acrylic primer, which dries quickly and incorporates VpCI corrosion inhibitors that increase its durability and resistance to corrosion. Provides excellent protection on surfaces that do not necessarily need to be immediately covered with paint. This primer is especially suitable for repaired structural steel and for steel surfaces with a profile greater than 1 mil.

Home » Work Areas » Corrosion protection » Coatings » VpCI-375 Acrylic water-based primer for metals

PRODUCT DESCRIPTION

VpCI-375 is a water-based acrylic primer that dries quickly and incorporates VpCI corrosion inhibitors that increase durability and corrosion resistance.
VpCI-375 provides excellent protection on surfaces that do not necessarily need to be immediately covered with paint.
This primer is especially suitable for repaired structural steel and for steel surfaces with a profile greater than 1 mil. The complex blend of non-toxic organic inhibitors offers protection that can compete with most zinc-rich paints and primers.
VpCI-375 being a fast drying and thixotropic coating, it is resistant to slipping and sagging, forming a resistant and protective barrier. This dry-to-touch film provides great protection in both outdoor and indoor conditions.
It performs optimally outdoors, without cracks or wear from prolonged exposure to sunlight.

ADVANTAGES

  • It is not flammable.
  • Dries quickly.
  • When dry it is resistant to UV radiation.
  • Optimal performance outdoors.
  • It can be used as a single coat system, serving as a primer and topcoat.
  • Provides multi-metal protection.

PROTECTED METALS

  • Carbon Steel.
  • Aluminum.
  • Stainless steel.
  • Galvanized steel.

APPLICATION

When VpCI-375 is applied in 4 mil DFT it can be used as a topcoat or as a primer. VpCI-375 can also be used as a topcoat with Cortec®VpCITM-374 primer. When solvent based topcoats are applied over VpCI-375 their compatibility should be checked.
Note: Make sure the dew point is above 2° C and lower temperature than ambient for the application.
Shake the product vigorously until a homogeneous mixture is obtained, use a “squirrel cage” type mixer, a hand mixer, or other equivalent equipment.
VpCI-375 can be applied by spraying, rolling, brushing or dipping.

Conventional sprayer.

Manufacturer                          Model of Gun                              Nozzle
DeVilbiss                                  MBC ó JGA                                        704E
Binks                                         #18 ó # 62                                       66PE
The mouth of the hose must be 0.95 cm I. D. minimum with a maximum length of 15.2 m. The tap must always have double regulation, and they must be kept at the same height as the spray gun.

Airless sprayer.

Manufacturer                          Model of Gun                               Nozzle
Graco                                        205 – 591                                        Bulldog
Binks                                         Modelo 500                                    Mercury 5C
DeVilbiss                                    JNG – 501                                        QFA – 519
The mouth of the hose should be 0.95 cm. I. D. at least, but the final section with a size of 0.64 cm can be used. I. D. for easier application. A maximum length of 30.5 m is recommended. Best results will be obtained using a 0.3 – 0.4 cm nozzle. with 83 – 117 bar.
Note: It is recommended to use Nylon or Teflon containers, available from the pump manufacturers.
Note: Similar equipment can be used.

PACKAGING AND STORAGE

VpCI-375 is available in 19 liter metal containers and 208 liter drums.
Prevent the product from freezing.
The product has a shelf life of 1 year.

RELATED FILES

·Catálogo general de pinturas VpCI

· Catalogo general VpCI-MCI