Contact glue

APPLICATIONS

It is indicated for strong and elastic joints in a wide variety of materials such as: rubber, wood, MDF, plywood, chipboard, Formica^®, carpet, metal, linoleum, cardboard, felt, leather, fabrics, ceramic, concrete, etc., both with each other as in combination.

Not suitable for polyethylene or polypropylene.

HOW TO USE

• Clean, dry and degrease the surfaces to be joined.
• Apply a thin layer of glue that covers the surfaces to be bonded with QUIMILOCK CONTACT GLUE.
• Let dry long enough until the glue has formed some skin.
• In the case of porous materials, it is recommended to apply a second layer of glue on top of the formed skin.
• Join the two parts by pressing hard for a few seconds.
• Keep the tube tightly closed in a cool, dry place.
• Resistant up to 90 ° C (film once dry).
• Use in well ventilated areas.
• Consumption of 100 to 250 gr/m_², depending on the materials.
• Not suitable for styrofoam.
• Keep out of the reach of children.
• Operating temperature between 10º and 25º C.