Q-101Z


Q-101Z is a medium viscosity (90 cPs) ethyl cyanoacrylate adhesive. It is formulated for bonding difficult and porous substrates such as leather, paper and wood.

PRODUCT DESCRIPTION


Q-101Z is a medium viscosity (90 cPs) ethyl cyanoacrylate adhesive. It is formulated for bonding difficult and porous substrates such as leather, paper and wood.

ADVANTAGES


  • Synergy in action between desiccant and VpCI provides excellent corrosion protection.
  • The VpCI product continues to provide VpCI protection when the desiccant is completely depleted.
  • Continuous protection for 24 months.
  • The VpCI layer does not need to be previously removed for processing or use of the protected parts.
  • Provides protection against multimetal corrosion.
  • The color changes from blue to pink allowing the user to know when the desiccant is exhausted.
  • It does not require degreasing or cleaning stages of the protected parts for use.
  • The VpCI vaporizes and deposits on the entire surface of the metal, reaching all areas, including hidden areas.
  • The VpCI film is self-regenerating to provide continuous protection to the packaging.
  • It can be easily inserted manually or automatically into the packaging.
  • Protection of aluminum, carbon steel, stainless steel, copper, bronze, galvanized steel, silver and welding.

TYPICAL APPLICATIONS


Q-101Z is specially designed for gluing absorbent and porous surfaces such as paper, wood and leather. Q-101Z is also suitable for fast bonding of a wide range of plastics, metals, and rubbers.

Los usos más habituales incluyen:

  • Conjuntos completos, piezas y componentes.
  • Equipos eléctricos, electrónicos y de control.
  • Equipos electrónicos marinos y comerciales.
  • Interiores de accesorios de iluminación.
  • Motores y controles mecánicos.
  • Herramientas, repuestos y componentes.

PROPERTIES OF UNCURED MATERIAL


Chemical type Ethyl
Etilo
Appearance
Clear
Specific gravity
1,06
Viscosity cPs1
_Rank
_Typical value
80 – 120
90
Tensile strength2 (N/mm²)
20
Fixture time (sec.)
3 – 20
Total cure (hours)
24
Flash Point (° C)
> 85
Shelf life at 5º C (months)
12
Maximum fill gap (mm.)
0,15
Operating temperature range (° C)
-50 a +80

Curing speed vs. Substratum

It depends on the type (s) of substrate used. Q-101Z is designed for use on a wide variety of surfaces, including acidic ones such as leather and paper. Plastics with low surface energy (polyethylene, polypropylene, Teflon® require the use of a primer.

Cure speed vs. Clearance

Quimilock cyanoacrylates give the best results when gluing parts. The product must be applied in a very fine line in order to guarantee a fast polymerization and a strong bond. Excessive clearances will result in a slower cure speed. Cyanoacrylate activators can be used to greatly increase the cure speed.

Curing speed vs. Environmental conditions

For a cyanoacrylate adhesive to start the curing process, it requires moisture on the surface of the substrates to be bonded. Curing speed is reduced in low humidity conditions. Low temperatures also reduce curing speed. All figures relating to curing speed have been taken at 21° C.

Curing speed vs. Activator

Cure speed in less than 2 seconds can be achieved with most Quimilock cyanoacrylates. The use of an activator can reduce the final bond strength by up to 30%. It is recommended to do a test on the pieces, to measure the effects.

RESISTANCE TO ENVIRONMENTAL CONDITIONS


Heat resistance

Quimilock cyanoacrylate adhesives can be used at temperatures up to 80 ° C. At 80 ° C the bond strength will be approximately 70% at 21 ° C. The bond strength at 100 ° C is approximately 50% of the full force at 21 ° C.

Heat aging

Quimilock cyanoacrylates, retained more than 90% of their strength when heated at 80 ° C for 90 days and then tested at 21 ° C. Heating to 100 ° C and then testing at 21 ° C, achieved a strength of initial bonding of about 50%.

Chemical / solvent resistance

Quimilock cyanoacrylates show excellent chemical resistance to most oils and solvents, including motor oil, leaded gasoline, ethanol, propanol, and freon. Cyanoacrylates are not resistant to humidity, nor to the humidity that appears over time.

GENERAL INFORMATION


For safe handling of this product consult the Product Safety Data Sheet.

DISPOSAL OF CURED CYANOACRYLATE


Cured cyanoacrylate can be removed from most substrates and disassembled parts. It cannot be completely removed from fabrics.

INSTRUCTIONS FOR USE


The gluing speed is very fast, so make sure that the pieces to be joined are correctly positioned before gluing.
Activators may be required if there are large gaps or porous surfaces. Some plastics may require the application of a primer.
Make sure parts are clean and dry, free from oil and grease.
The product can normally be applied manually, directly from the container. Apply the product sparingly to one of the surfaces and press firmly until the pieces are firmly glued.
In general, a small amount of product should be used, an excess of product, can result in a slower cure speed and lower bond strength.

STORAGE


Store in a cool place away from direct sunlight.

Refrigerated at 5 ° C, it provides optimum storage stability.

PACKAGING


Available in packages of 20, 50, 100 and 500 gr.

Quimilock
Privacy Overview

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.